PDA

View Full Version : Control Behavior settings


Lompma
04-18-2011, 07:31 PM
I was wondering if anyone had an idea of the dual rates and expo with the built in Control Behavior settings. IE Sport = 70% Dual rate and 25% Expo, Pro = 90% Dual rates and 15% Expo etc. I was wondering if any of the presets would suit my preferences or if I will have to go with Transmitter. I use 100% Dual rates w/10% expo on my Trex 550. I notice in Sport setting it has really limited my tail servo throw to about maybe 60-70 % dual rates. Just an estimate.

airjawed
04-18-2011, 07:56 PM
I was wondering if anyone had an idea of the dual rates and expo with the built in Control Behavior settings. IE Sport = 70% Dual rate and 25% Expo, Pro = 90% Dual rates and 15% Expo etc. I was wondering if any of the presets would suit my preferences or if I will have to go with Transmitter. I use 100% Dual rates w/10% expo on my Trex 550. I notice in Sport setting it has really limited my tail servo throw to about maybe 60-70 % dual rates. Just an estimate.
Every radio is different... no way to say what the built in presets have.

Very hard to compare a FB setup with a FBL setup as well without knowing your headspeed and pitch/cyclic values on the 550.

Lompma
04-18-2011, 08:39 PM
Head Speed 2400 St 2
Cyclic 7 deg
Collective Pitch 11 and 11 deg

I dont like to much mushiness in the middle. Using DX7 Tx.
I was refering to the presets in the Beastx. Sport, Pro, Extreme.
From what I have read I dont think I will like the default Sport Setting.

bj660raptor
04-18-2011, 09:31 PM
Set it for a solid blue light I.e. transmiter mode and set it how you like.:)