upgrading Blade CP Pro

[uselessmidget]

I recently just ordered a bunch of upgrades for my BCPP. It was all reccomended stuff, a ar6100 reciver for my DX7, eflite esc, G90 gyro, Park 370 4100kv, etc. so when i was looking over my heli i relized, when i take my 3 in 1 out how will i plug the tail motor into the gyro? is it ok to plug just the 2 plugs onto the 3 pronged gyro? will that work? am i forced to keep the 3 in 1?

[Jermo]

There are some mods for seperates that explain how to seperate it all out.
Jermo

[uselessmidget]

do u know of any? where i can find them?

[Jermo]

try putting cp pro seperates mod in google, I get alot of hits from that.
Jermo

[uselessmidget]

hmm im not finding anything that really relates. and what exactly is a seperates mod?

[Jermo]

basically seperating the reciever from the motor controls/gyro..etc so you can use seperate components as you want to.
Jermo

[uselessmidget]

well will i just be able to plug my tail motor into my gyro? just plug the - to - and + to + and leave the signal lead unpluged?

[stikflyer]

Your tail motor will have to be plugged into a separate ESC which is in turn plugged into the gyro which would be connected to the rudder channel of your receiver.
Some instruction can be found here. http://www.helihobby.com/html/separate_electronics.html
This is for a FP heli but it is the same for a CP heli except for the third servo.