Logo 10 3D on 4S???

[wcc963]

i was looking into getting a logo 10 3D and wanted to run 4S and want to know what is a good 3d setup: motor and ESC?

[OICU812]

I have never heard of anyone running a L10 on 4S, as I think no one else has, it is really a 5 or better yet 6S setup machine.

[lowflyer101]

years ago , they running on 4s4p ,, i still know a guy in LA running this set up with a hacker motor, i don't know the motor label, but it look like the same motor that use on lepton ,, he is just hover around.. the power is nowhere near my logo10 on 6s-7s :)

[tthroop]

I am currently running my Logo 10 on 4s1p 3700. I am using a 11t pinion with a Krontronix 600-17 motor. I made a change over to the Logo 14 gears to get around the problem of the weak gear teeth on the Logo 10 main gear. I haven't tached the headspeed yet, but it is close to 2000. I can easily get 7 minutes plus of flight time, I am only putting about 2700mah back into the battery after only 6-1/2 minutes of flight time. I need to put the heatsink back on the motor to run any longer. I don't do any 3D manuevers, but it seems to be able to do fff easily.

Terry Throop

[bladebreaker]

I started my L10 on 4s and it was ok for hovering and basic maneuvers, but you will want more power very soon, so I would start with more. Mine flys well on 5s, but you would probably want 6+ for aggressive 3D.

Shawn would fall asleep if his heli was powered by 4s! MORE POWER!

Tip