Futaba S3114 servos in a cp pro

[Buzzkill]

I installed Futaba S 3114 servos in my CPP and its acting very weird. I have them plugged in the right channels. It seems to work fine for a few minutes the all of a sudden the servos go nuts. All three of them get gittery. I unplug the battery and plug it back in and all is fine for a few more minutes. Anyone have any idea whats happening?

[carlo_the_wonder_frog]

unplug one at a time and see if it isn't a bad servo first. then check your electronics placement and make sure there are no bare wires touching anything. Check your antenna wire, also if you are using the stock transmitter it may help to clean the pots inside the radio. Alot of different things could be causing the trouble and it may take some work to find out the culprit.

[Buzzkill]

Seems to have corrected itself. Hope it doesnt rear its ugly head in flight lol.