PDA

View Full Version : DJI - Stab for Scale


sidneyw
05-20-2011, 02:34 AM
Cobra 600 TFModel Swift 16 frame ..... DJI Stab

_1OmfSDWIMk

Q8pPqwF_pbg







(http://www.youtube.com/watch?v=_1OmfSDWIMk)

SidewaysLS4
05-21-2011, 12:40 PM
Is that the one using Logo 600 mechanics that was youtube'ed in the past? Looks great!

sidneyw
05-22-2011, 03:37 AM
Swift 16 mechanic.

SidewaysLS4
05-22-2011, 07:13 AM
Thanks. I'm wondering if you could find out if a Logo could be used with the Smartmodel tail riser mechanics? I'm not sure what belt/boom differences are between the Swift/T600/Logo mechanics, and what will work with the supplied tail riser parts

sidneyw
05-22-2011, 06:35 PM
New Swift NX tail casing is very easy to install (going over the tube). BTW, Logo t/r is interchangeable with Swift.

sidneyw
05-25-2011, 03:27 AM
Time for 3-bladed head test ....

UodBYKcIXq4

sidneyw
05-27-2011, 08:12 AM
5-bladed head this time ...

hqtUbMUvvuI

sidneyw
06-02-2011, 08:22 PM
1st 5 minutes flight test after switching from CW to CCW main, and adding Vario scale blades (710mm). Needs to increase gain slightly for both ele and ail.

HZdQmJMV-M8

sidneyw
06-08-2011, 06:29 PM
Huey 800 .....

db4XnsS8A3Q

cobra_attack
06-08-2011, 07:26 PM
Man I so want one of these systems! But can't afford one. Do you have a build thread on your Swift 16 Cobra? I have a Swift and Smartmodel Cobra coming in and would like to read up on other builds

sidneyw
06-10-2011, 11:03 PM
There is nothing special in mounting Swift 16 into the Cobra. Except either pitch or aileron push/pull link has to be cut on the upper side due to the narrow body, I forgot which one. I did the same to my Century JetRanger using Swift mechanic also.

I believe MSRP of the scale version DJI stab is around $1,600 less than half of the AP version. I will have more info by month end.

rerazor
06-11-2011, 11:42 AM
I will have my test sample of the scale version this week and post a report end of week.

cobra_attack
06-11-2011, 12:07 PM
I think this is exactly what I want. I crashed one of my helis a few weeks ago, was caused by my lovely health issues (diagnosed possible MS last year).

So from my understanding if I have a flare up and am by myself I can flip a switch and the helicopter will land safe and not crash?

sidneyw
06-12-2011, 09:56 AM
The auto landing feature is with Ace Waypoint only, and it lands after the mission is complete. The scale version will auto hover when you let go the sticks. In short, you'd better to have a buddy with you, so he/she can take control. Landing can be done in auto mode therefore an inexperience pilot can do it with ease.

cobra_attack
06-13-2011, 07:06 PM
Thanks for the info sidneyw! I learned my lesson flying solo in the summer heat. Keep up the good work!!

rerazor
06-13-2011, 09:48 PM
Installing the WooKung Tuesday and will report.

sidneyw
06-14-2011, 09:27 PM
Will post video later.

sidneyw
06-14-2011, 11:46 PM
Here are some sample of values for 1st time install .... your mileage might differ.

http://helifreak.com/attachment.php?attachmentid=234153&stc=1&d=1308113096

http://helifreak.com/attachment.php?attachmentid=234154&stc=1&d=1308113096

http://helifreak.com/attachment.php?attachmentid=234155&stc=1&d=1308113096

http://helifreak.com/attachment.php?attachmentid=234156&stc=1&d=1308113096

sidneyw
06-15-2011, 07:04 PM
Some more info ....

http://helifreak.com/attachment.php?attachmentid=234305&stc=1&d=1308182665

sidneyw
06-19-2011, 06:44 PM
Flying indoor using barometer without GPS reception.

gC0WyBnuwV8

sidneyw
07-06-2011, 12:28 AM
TFModel mechanic, 6S, 600mm blades, 800kv.

BcbUkEkhBvc

sidneyw
07-12-2011, 06:57 AM
Little JetRanger

hjCl3MnuxDs

sidneyw
07-12-2011, 07:32 AM
Oops, posted twice.