Raptor 90 Headspeed etc

[MrMel]

If you didnt have to worry about motor/gearing to get optimal performance from the motor, what headspeed would you run on a 90SE with 690VBlades for Hard 3D?
Or would you run different blades maybe?

Lower HS with higher pitch or higher HS with lower pitch?

(Mine is electric, so I can pretty much gear/dialin towards any HS...)

- Fredrik

[Dave]

2,600 is probably a good starting point.

[MrMel]

2,600 is probably a good starting point.


Dont know what i did to offend you, but it must have been huge since you giving an advice that can kill a person.
But sure, I will try if you agree to stand as a shield between me and the heli.


--
I simply wonder if the Raptor 90 has a sweetspot when it comes to RPM vs Blade length contra pitch, I know my Logo has it, and my Trex as well, but since im new to the Raptor 90 Im asking here.

[Maxists The Baddist]

I've read that most fly between 1800 and 1900.

MrMel and a Raptor? MrMel is synonymous with Logo and electric.

[MrMel]

Thanks, I currently run 690 blades at 1900, gonna try 710's and 1850 to see how it performs.

Yep, but Raptor and Electric is OK too :)
Its a E-Converted raptor 90.