Align Charger and TP Battery - won't charge warning beeps

[CTR]

Ok I have the Align balance charger and it works great on the align batteries. But I just bought the TP 2200 mah 11.1V battery and the guy sold me the TP to JST Adapter (3S).(((This adapter connects to a TP 3S pack and allows it plug into a JST style header. This adapter will allow you connect your TP packs to an Align charger.)))))


When I tried to plug it in my align charger set off its warning beeps??? The beeps mean something is wired wrong. Anyone know whats causing this? :arggg:

[Pinecone]

Could be reverse polarity of the tap plugs. Common Sense RC and DN Power have reversing cables.

[CTR]

[quote="Pinecone"]Could be reverse polarity of the tap plugs. Common Sense RC and DN Power have reversing cables

Pinecone thanks for the reply!

It turns out my LHS sold me the DN Balance Charger to TP Thunder Power 3S Battery Adapter
http://www.readyheli.com/DN_Power_Balance_Charger_to_TP_3S_Battery_Adapter_ p/dn2tp_adapter.htm

instead of the TP-->Align Adaptor(for 3 cells)ThunderPower-->Align Balance Plug Adapter shown here
http://epyaya.com/product_info.php?products_id=1661

The connectors are just flip over on the end.
I was able to take out the wires and flip the connector and now its works!