How to connect a JR9303 to FSOne?

[FearNot]

Guys,

I cant get my 9303 to connect to FSONE.. I follwed the FAQ and created a model with PPM and plugged the cable in the DSC port on the Tx ... that really the only port I could find... is it the right port?

I dont get any controller activity in the windows game controler setup :(

Need help!

cheers

Matt

[FearNot]

works now ... cause seemed to be the order things are plugged in ...

[FearNot]

I have it figured out now ...

Conencting the Tx to the PC seems to be a matter of plugging it in / tuning it on in the right order ... at first it never worked .. now it always works .. :dontknow as long as it does work ... :mrgreen:

One has two options:

1. use only the sticks from the 9303 and let FSone do all the mixing.

In this case make a new model. With NO swash mixing and no other mixing. Do a MDL reset to clear all settings.

Make sure the Tx is set to PPM!

calibrate the TX in FSone ... dont bother about the move this stick now instrucitons just make sure you move ALL swtiches and ALL sticks through the FULL extensions (also the ones on the side). Then finish calibration.

Now you can use all the mixing from FSOne your Tx will be just as good as the one supplied as all it does is transmit the stick movements. And quiet frankly, if you have FSOne with Tx then using the one supplies is more convenient.

2. Use all the mixing from your 9303

I like this much better as it lets you use the features and experiment with them.

Again. Make a new model, MDL reset but select 120 CCPM mixing in the TX. Select PPM modulation.

In FSOne.Select the any radio (calibrate as under 1.) and go to edit. Delete ALL mixers, ALL EXP and all DL.

Make sure you delete the throttle hold switch assignment. Its channel 6 or so.

Then use your 9303 to control the servos. It should work but you may have to invert the CCPM channels (I had to invert aileron and elevator) or you may have to invert servos... Once this is all worked out you can fly using all the features of your Tx

Matt