View Full Version : rx for trex 250?
06-29-2011, 12:33 PM
I'd like to convert my 250 to futaba, but have no clue which rx should I get - any recommendations? 6 channels is sufficient, must work with 8fg and be genuine futaba.
06-29-2011, 12:56 PM
R6106HFC is a great choice. Mid range rx but fine for a 200-size heli. Also endpin so it's easy to wire in the 250 frame.
06-29-2011, 02:11 PM
I've got a R6008HS on mine. Fits nicely between the frames, but it's quite big compared to a 6 channel spectrum receiver.
Another option to consider, is the R6203SB and going flybarless. The R6203SB only has 3 output channels, BUT can send 8 channels to your flybarless controller via SBUS. VBar, BeastX and the Futaba CGY750 all support SBUS, maybe others too. It's another option to consider :-D
06-30-2011, 12:30 PM
Thank you, R6106HFClooks very good. I have GY750/R6203SB on my mini protos, but I prefer my 250 to stay FB.
07-12-2011, 06:47 AM
If using flybar the R617 should work just fine, the R6203 would probably also work, a mid range receiver (I don't think you will be getting the 250 far enough away for it to not work).