X-Cell Ion with actro mount

[Tabbytabb]

Tony, the blades were probably slightly misaligned and it went into a ground resonance/chicken dance thing.

Try throwing a chunk or carpet or something soft down on the hard floor to help the problem

Sorry to hear about this!

Tabb

[misskimo]

yeh ! it does suck , but thats part of the learning curve sometimes , The MAH are tail heavy which makes them unstable and why thay have a quick roll rate was what Chris told me . Just got in a pair of TGs from MA today. will throw those on there instead of the MAHs . I need a set of 9252 gears is all . slap on some rubber feet , check the 3D head out , today I left it alone , let it sit to punish her for not listen to me . also I ran my 10s3ps , so the heli is lite too , Karl might send up a set of 9252s until I get somemore gears in . remote site sure sucks , Maybe I should get my MA distrib. license for Alaska , he he , eastcoasttanics is a MA dist. now , he he , at least Bobby listen to me on one thing , MA Ion rules huh? Im also the owner of your old Predator now thanks to Karl ,

Tony

[BobbySmith]

Heheh
you didnt have tell me nothing :roll: the first time i seen A ION fly i had to have one!! I think i told you to sell everyting and concetrate on youre E fury and youre ION :smokin:
Either way it doesnt matter get that thing flying!!!! :glasses2:

Bobby

[misskimo]

DIDNT tell you nothing ? ShII!IiiiiTTTT ! I did too , you were like talking to a :arggg: wall , he he , and also I had the Fury for 1 1/2 now as 13s3ps , gen 1 TPs , and it still would cook , and that was before Chris started working with MA, but Chris was one of the main reasons why I desided to go with the Fury , since he was on ezone a bunch , ya your right , I got to get it flying , got the gears replaced , 1 gear set that I had fixed both servos , he he , now I need to order about 10 sets for this summer, I know Im going to need them , but I wish I didnt , need to put a roll cage around my batteries :smokin: and replace my 9251 gearset, which will be taking off this week and sold , 401 9254,

Tony

[WillJames]

you can buy 9253 gearsets for your 9251, since the output gear is metal and won't break. Saves you a little $$.

You guys have me wanting an Ion!!

[misskimo]

thanks , didnt know that


Tony

[BobbySmith]

Will
thanks for sharing that info!!

Tony thats right Iam Authorized Minair dealer


Bobby

[WillJames]

Hey Congratulations Bobby!!

[lucky]

Good luck with your actro 32-3. We had problems with the way the moter hooks to the . What Im trying to say is the thredded shaft that screws into the moter breaks . It happened twice. But note I had someone elese install it the second time same thing happened. Maybe someone knows the fix?

[misskimo]

hey , well Im haveing sucky luck but I can say this , Im running the airplane version actro , dont have to worry about the 4mm shaft adaptor breaking off , but sounds like you have a vibration problem in your motor , do you have a big bearing block on top with 2 bearings or 1 , if 1 , then you need 2 , that will fix the problem , if you have that , then you need to make sure the threaded part is seated on the X part of the motor , its there is a 1 thousandth gap , then it will break off from vib fatige quicky

Tony

[misskimo]

hey , well yall , it flew , all I can say is WOW! for 9 1/2 pounds she sure can move , 3ps sag alittle but no biggy , they are gen 2s 10s3ps . WOW , got to run work is calling
stationery rolls , and flips ,

Tony

[lucky]

Nice show some pics

[misskimo]

well its not a great picture , my sony handy cam takes great videos , but the pictures suck , need a flash for it http://www.helifreak.com/album_mod/upload/517dccde719e2f5f2e43003c62e81e89.jpg

[misskimo]

hey , well I flew a second flight in today , 6 minutes sure goes by fast , man what a roll rate from hell, still got to do some tweeking though , station flips come out kinda crooked , but maybe thats wind up yander, dang thing still has me shaking while flying , the thing is , last year , the only thing I flipped or rolled was the sick voyager E that grunted and twisted while trying to do a stationary flips , and before that a flip with my old Joker , this year was a first with this heli tossing a turning and flipping with something that has a roll rate from hell and POWER , the sim sure did its job over the winter to help fine tune some 3D action and the inspiration from watching Karl grow wildly into 3D which gave me the nuts to do something besides just fly , now all I need is more sim and good weather like today , 24 hour sunshine and 50 degrees F . one happy camper :smokin:

Tony

[misskimo]

hey , just got done charging my batteries , 6 minute flight and put back in 3500 ma , that was at 100% gov mode though out the hole flight , HUH? here I said on the first flight that is was a gas hog , seams like its not . I was expecting about 5000 to go back in , huh? 4 flight on these batteries , need the new PRO prolites now , 18C yeh!!!!! now we are talking about some power with 3Ps

Tony

[simon109]

Hi,

Where can I get the part 124-110 I tried Heliproz but they haven't got it, don't mind where I get it as long as I can pay online.

Also where's the best place to get the Actro 32-3 Heli motor ?

Last question, what difference's will I see using this compared to the standard Hacker with 54T ?

Thanks

Simon.

[simon109]

Oh yeah I wont have the 54t gear on it with the Actro will I :roll: :mrgreen:

Simon.

[BobbySmith]

Simon no it is a single stage set up no more secondary gear.
As for the 124-110 i have them in stock for 119.00 and i can get you the 32-3 pm me

Bobby

[misskimo]

its done , Im running the actro 32-3 heli version now , AOW 9lbs ,10 oz with 10s3p prolites , or 10 lbs 8 oz with the 8000 prolites

[misskimo]

another

[ChrisS]

Thats pretty stinkin' cool Tony. I look forward to seeing it at IRCHA

Chris

[misskimo]

hey , heres a picture of my fury conversion 10, 11, 12, 13, or 14S lipos , and Karls new canopy for the proto Ion 50 that kicks butt,

[WillJames]

Can't wait to check these BAD BOYS out at IRCHA!!!

:smokin:

[misskimo]

here's a pretty picture , half of our MA line , from the left to the right
my Ion, my fury conversion 10 to 14s lipos , Karls Ion 50, Karls bling BLING tempest cromey, my Ion 10 to 14s lipos , my stratus not ready yet,

Tony

[Albig]

Man are you SICK Tony :noteworthy

They look Awesome!

Al