Miniature Aircraft Furion 450 BNF

[mtnbike101]

I'm rebuilding my Furion 450 to replace main bearings, main gear, tail rotor pulley and kevlar belt after a season of flying. I'll be going through the entire kit replacing anything questionable with new parts and it will be like new upon completion. There's well over $1K in everything, selling for $550. More detailed pictures available upon request. Everything was purchased new by me and assembled with detail following the excellent build videos here on the Freak.


Fully assembled Furion 450
Align aluminum case with modified foam to fit heli
Hitec 5065MG (x 3) Cyclic Servos
Futaba 9257 Tail Servo
Futaba GY401 Gyro
XCell (Scorpion) Motor
XCell (Scorpion) ESC
Wireless Programming Card
Spektrum AR6011 Receiver
Fusuno FG Canopy
Curtis Youngblood CF Blades
Foam Blade Guard (1)
Manual on OEM CD
OEM Canopy Stickers
OEM Box



Spare Parts:

XCell Crash Kit (1)
HeliDirect CF Blades (1 pair)
HeliDirect Wooden Blades (3 pair)
3D Pro CF Blades (1 Pair)
Tail Boom (1)
Main Gear (2)
Hardened Main Shaft (2)
Kevlar Belt (1)
Flybar (1)
Hardened Head Axle (4)
Threaded Control Rods (2)
Boom Support (1)
Main Bearing (1)
Thanks for looking!

[mtnbike101]

Finalizing the build tonight (setting pitch, checking for CCPM, etc.).

Also, there are many more extras than I previously noted. This will be one heck of a deal for someone wanting the best 450 class helicopter out there. I have only hovered this heli, no FFF, no 3D, just hovering. I went through everything end to end to ensure all bearings were smooth and it was as close to new as possible.

The following components were replaced with new:

· Main Bearings
· Lower Bearing Block (messed up the original removing bearing:))
· Main Gear
· Main Shaft (Hardened)
· Autorotation Hub
· Autorotation Sleeve
· TailRotorPulley Hub
· Tail Rotor Belt Pulley Bearings
· Tail Rotor Pulley
· Belt


The following are included on or as part of the heli:

· Fully assembled Furion 450
· Align aluminum case (never used)
· Hitec 5065MG x 3 Cyclic Servos
· Futaba 9257 Tail Servo
· Futaba GY401 Gyro
· XCell (Scorpion) Motor
· XCell (Scorpion) ESC
· XCell (Scorpion) ESC Wireless Programming Card and IR Remote
· Fusuno Canopy
· Curtis Youngblood CF Blades

The following are the spare parts included with the purchase:

· XCell Crash Kit (1)
· XCell Carbon Fiber Flybar Lock
· XCell Carbon Fiber Pitch Gauge
· XCell Foam Blade Guard (1)
· HeliDirect CF Blades (1 pair)
· HeliDirect Wooden Blades (3 pair)
· 3D Pro CF Blades (1 Pair)
· Tail Boom (1)
· Main Gear (2)
· Hardened Main Shaft (2)
· Kevlar Belt (3)
· Carbon Fiber Boom Support (1)
· 11T Pinion (1)
· 13T Pinion (1)
· Head Axles (3)
· Tail Rotor Blades (2)
· Flybar Control Link (2)
· Plastic Ball Links (numerous)
· Carbon Fiber Blade Grips (1 complete set)
· 70 Durometer O-Rings (4)
· 90 Durometer O-Rings (4)
· Canopy Grommets (4)
· New Style Head Shims (2)
· Threaded Control Rod (2)
· Original Canopy Decals
· OEM Manual on CD
· OEM Box
· OEM ESC Metal Box

[mtnbike101]

Flying High Again

[mikestiles]

Will you be up to trades.

[mtnbike101]

PM me with what you're thinking.

Thanks!

[Supersix1]

Still for sale?

[mtnbike101]

Yes, it is still for sale. :thumbup:

[mtnbike101]

This heli has been sitting on my desk and has not been flown since the major rebuild last year. Thought it was time for a bump. lol

If anyone wants just the airframe and parts, let me know. I can always use the electronics on another project or sell separately.