PDA

View Full Version : Is it posable to use two 3s chargers on a 6s


dna001
03-26-2007, 10:19 AM
Still not upto speed on all this battry charging so be gentle with me :-)
What I am trying to do is figer out the 6s balance lead

Now I have two 3s balancers and I am trying to use two 3s chargers to charge a 6s battery Untill I can get a 6s charger
But I am getting a bit lost as to how to wire the 3s balencers to the 6s balance lead
I have an astro blinky 6s balancer I will use to balance with after charged.
Can some kind person point me to a link or pic

Thanks

Gary JP4
03-31-2007, 01:25 PM
You should be able to do this. You would use the first charger / balancer wired to charge cell 1 thru 3 and the second to charge cell 4 thru 6. I will see if I can find a link to referance. It would be easier to draw a picture but I am not set up for that here.

Pinecone
04-01-2007, 09:01 AM
You will have to wire up plugs to charge through the balancing taps. You cannot charge through the main discharge plug.

Also you will be limited to as to the charge rate to avoid burning up the smaller balancing tap wires.