FMA Cellpro 4s + Align balance tap

[Magnasanz]

Thought i'd give a cellpro a whirl seeing as i've decided i don't really need a fancy charger/balancer. Just wondering if i need to get a seperate harness to work with the new Align 2100mah 22c battery? I've also got some hextroniks 2200mah coming and wondered if they would connect up ok?

[Phyroinstinct]

Hello there. I have two 4s chargers charging of a 10amp PSU. They work great!

If your looking at the 4s you'll need a corrisponding charging harness for each charger that matches your battery. Im not sure for hextronic batterys(Got some coming in my-self) but for the align battery you will neeed the GP (Great planes) charging harness. I run battery hobby batteries. But the GP (modle CP-GP) listed compatible with the align batterys for charging.

For each charger you buy. You will need one of these for each charger to charge the align battery packs.
http://www.fmadirect.com/detail.htm?item=2196&section=45
http://www.fmadirect.com/support_docs/item_1231.pdf


Cant give ya the info on the hextronic.
Iv heard the hex's are align balance type. But cant confirm at this moment.


Need any more info just shoot a pm.
Phyro

[Magnasanz]

I just did some frantic power searching and came up with the same info you provided so thats good. I'm pretty certain the HTX batteries have the Align balance tap so should be all good. Ordering now :)

[Phyroinstinct]

Sweet, the 4s chargers are excellent choic IMHO.

manuals very clear and easy as well. :)

Phyro

[Gary JP4]

Thought i'd give a cellpro a whirl seeing as i've decided i don't really need a fancy charger/balancer.

It is a fancy charger/balancer just not a big one. That's about as good as it gets.