Timer function on 7C

[usherwdp]

Hi,

I want to set the timer function on my radio (7C). I'm fine with getting into the function setting the time and mode, but I dont know which SW> option to set for the throttle.

I'm probably being daft, but is there a list of SW> switches and their associated f7 functions?

Cheers,

Peter

[BarracudaHockey]

Page 37 in the manual explains it pretty well.

http://www.futabarc.com if you dont have the manual.

[ZZ3Astro]

Be careful with the timer function when you link it to the throttle. There was a problem in the early release 7C radios that caused one of the end-points to reset to 0 (I think on channel 1) when you activate the throttle timer function. I'm sure they fixed it on the later releases. Just be sure to verify all controls after setting it up.

steve

[Skiddz]

I tie my timer to my throttle.. Once throttle hits 30%, the timer starts...

[usherwdp]

So I'm the dumb guy at the back of the class :oops:

I have the manual and i've looked at page 37, but I still don't get it.

Come on BarracudaHockey help me with my homework :D

Switch a-h by stick (1-4) what does that mean ?


Skiddz what settings did you use to get trottle an 30%

Cheers,

Peter

[BarracudaHockey]

Since channel 3 is throttle I'm going to go with Stick 3

Set the throttle to where you want the time to start counting and press and hold the wheel.