buster1
03-30-2007, 05:48 PM
could anymore tell me the set up for DX7 with reflex,
I am having trouble getting the heli. to respond correctly and fly right - could anyway give me the basic programming setup that works with reflex,
Thanks,
Jeff
johnjohnston
05-31-2007, 12:54 AM
Jeff,
You haven't said what heli you have set up on your DX7 so will assume its a CCPM bird.
You need to create two models in your DX7 one for your heli and one for Reflex.
I would copy your existing model to a new model, or you can go through and set up all the settings again.
The only thing that changes is the swash type. For reflex this needs to be set to normal 1 servo.
All other settings can stay the same. This includes your curves, servo reverse, D/R & Exp, Gyro, etc.
You then want to set all you switches on the DX7 to there default positions and click on Calibrate Center in Reflex, then once that is complete Click on Assign Channels and go through the channel assignment.
Just remember to change the model back before you fly your heli for real.
The results of forgetting are fairly spectacular! :shock:
Regards