Logo 10, Tango 45-10 + Jazz 55-10-32 - is it good 3D setup?

[rberkner]

Hi

Logo 10-3D.
Does any one use the Tango 45-10 + Jazz 55-10-32 combo with 6S EVO 20 3700 or TP extreme with 20-21t pinion?
Will the Jazz hold with the current needed for 3D?

Thanks
Ronny

[gosha]

kV is too low, I think. Anyway, on 6S you should use 138T main gear and motor with kV at least 1200. And don't forget that first value in name represet maximum countinuous current. Thus 55A will be not enough to handle a 3D with 6S motor - peak current may exceed 100A.

[Voodoo]

Hi Ronny,

We have a Tango 45-10 in the Logo 10 using 6s 3700mah.

But I would recommend the Jazz80. I think the 55 won't handle it as good.

Here is a little vid of our first flights with the Logo10 V-Bar:
http://vids.helistore.at/logo10_29-03-07.wmv

I think the power isn't that bad. :D

[OICU812]

The L10 does not pull a ton of amps. The 55 will handle it without issue. I ran a L10 with the 55 for dozens of flights flying it as hard as I could, no temp or performance issues were seen. The 80-6-18 is definetly a "better" choice in regards to how much amps you can push through it as voodoo mentions, the 55 will work fine as well. Voodoo, I like your guys videos, the scenery is most excellent and the flying is pretty darn good to man, thanks for sharing! :glasses2:

[keith shaw]

Voodoo, awesome flying~ :smokin: