gilera180
04-02-2007, 09:48 AM
My mini titan tends to roll right after take off, have checked swash plate is level from back and side view. If I trim the aileron to the left by 15 clicks on TX heli is upright but when I check the swash plate it is slightly tilted to the left. what you guys out there suggest I should do Thanks.
comeflywithme
04-03-2007, 12:45 PM
One thing I'd do is disconnect your motor from ESC and take a look at the swash plate as you increase pitch - check that it stays level. If it doesnt firstly ensure that all servo arms are at 90deg at 0deg Pitch. Use your subtrim to achieve this if neccessary.
Once you have done this, if your swash still tilts as you change pitch, try playing with your CCPM %'s. This should however only be neccessary if you are using different types of servos.
Finally, consider you C of G, this might be slightly off depending on what size tail servo you are using or if your battery is shifted to one side. Shouldnt make a huge difference though.