Safe amp draw on CP's 4 in 1???

[Jagzilla]

I'm pulling around 10 amps at wot on a stock 4 in 1. Is this too much? Any one know how many amps the stock system can safely handle?
Thanks,
Jaggy

[Gino CP]

That is too much. It can handle it in bursts but not continuous. A stock CP typically draws 3.5-4 amps. 6-7 amps continuous can toast the 4-in-1. W e usually put a 7.5amp fuse on brushed systems. But that only protects from burts. Continuous draw of 6-7amps can still damage the esc but not pop the fuse.

[Jagzilla]

Thanks a lot for the info,much appreciated.
J