Hacker 10 pole, 14s and CC85 program for Razor

[Clintstone]

This is my program for my Razor with Hacker.
################################################## #####
# Castle Link Data File
# Created: Sunday, March 25, 2007
# Do Not Edit This File By Hand
################################################## #####
Brake Ramp: Super Slow
Cutoff Voltage: 180
Hex55: 85
Brake Strength: 0
Direction: Forward (*)
Spool-Up Speed: 10
Throttle Type: Heli: Governor High
Current Limiting: Disabled
Brake Delay: No Delay
Motor Start Power: 2.125
Throttle Response: 2
Motor Timing: Low Advance
Cutoff Type: Soft Cutoff
PWM Rate: 13khz (*)
Governor Gain: 32.5714285714286

[misskimo]

hey Clint , does your motor run around 200 degrees like most of everyone else ? it puts out good power though , but not much more than the 45-08 ,

[Clintstone]

Just getting started with it and only 30 flights or so. The tail feels realy good around 2100. The motor seems to have a sweet spot which is in the middle, not full-out but not bogging either.

[buster1]

Clint, am I reading this thread correctly - you are running 14S with Hacker in the Razor??????????

[misskimo]

hackers motor is called a 14s motor

[Clintstone]

Hacker A50 14s motor running on 2 5s1p Flightpower EVO20 3700's

[buster1]

Thanks, understood - I just send you a PM about the hacker - as we now have the same setup - curious to know that at 2100 headspeed with those batts and HHCC85 ESC, what flight times you are getting,
Thanks,
Jeff

[Clintstone]

4 1/2 min to 5. Motor makes good power and is consistant. I will be counting flights as it is still lessthan 50.

[nregjeb]

Thanks for the CC parms Clint.

I also watched the video which you and Will made. Excellent work. Both of these were very helpfull in setting up my HV CC for my Razor.

My kit came with 8.4:1 ratio. Using Hacker A50/14S and 10s FP 3700 25c. This gave a target headspeed of 1860.
43% throttle in High Gov gave me the 1860 target head speed.
That is very dull for the way I like to fly.

I want 2100 and above. Should I jump to a 9.6:1 ratio? I think that would give me around 2114 target? ( my math skills are poor, that is why the question mark)

Is anyone else using a 9.6:1 ratio on a Hacker A50/14S on 10s in a Razor?

Thanks

[misskimo]

hey , you could , it will work with the CC 85 , but no one has tried it ,

[PG 378]

misskimo,
How did you fit 12s into your Razor?

[misskimo]

TP 3800s are long skinny packs

[PG 378]

Thanks

[buster1]

will two FP3700 6S packs fit in the Razor??