New Video - Logo24 Bionic - Old school heli

[Chachin]

Hello guys, thought I'd share the video here as well since there isn't much talk on this heli.

Here's the "old school" Logo24 Bionic. This used to be a Logo20 that I upgraded to the 24 frame for increased aerobatic capability. Still going and flying strong. Like all Logos... the thing flies like it's on rails. Hope you enjoy:

http://www.rcgroups.com/forums/showatt.php?attachmentid=1255143

Chachin..

[amdemby@pol.net]

What is the setup on your Bionic?
Dr. D.

[Chachin]

Hello D, here is the setup:

> Starflight 600mm blades
> Kontronik Jazz55-10-32
> Kontronik Tango45-06 with 8T pinion
> 10S TP 3850mAh Extreme packs
> Futaba S9252 servos for cyclic
> Futaba GY-401 and S9254 for tail control (stock plastic tail blades)
> Multiplex 9-Ch IPD receiver with Rx pack
> Mikado CF tail case
> Mikado tail rotor Thrust Bearings

Chachin..

[henrik04]

Hello guys, thought I'd share the video here as well since there isn't much talk on this heli.

Here's the "old school" Logo24 Bionic. This used to be a Logo20 that I upgraded to the 24 frame for increased aerobatic capability. Still going and flying strong. Like all Logos... the thing flies like it's on rails. Hope you enjoy:

http://www.rcgroups.com/forums/showatt.php?attachmentid=1255143

Chachin..

It's a beautiful bird. Which size blade are you using? Did you try AP or video?

[Chachin]

Thanks henrik, yes it's an awesome machine. I flew it again this morning at a local meet and man this heli is a pleasure to fly; lots of fun. Piros are also very consistent, even with the more economical 401 gyro.

I'm using 600mm Starflight blades. Back when it was still a Logo20 I mounted a camera at the front and did some aerial photography with it along with the help of a local flier. Pictures were breathtaking. Eventually I decided to remove the camera and set it up for 3D only (hence the upgrade to Bionic frame). I never tried video with it.

Chachin..