dhncali73
04-10-2007, 04:17 PM
Hello All,
hope someone can help, I have two heli's raptor 50 and 90SE both with GV-1. The 50 has been rebuilt after a crash new servos and reciever, and the 90 is new never flown both have been sitting for over a year.
now the problem i'm having
i started with the 50 the GV-1 sensor is reading 97% no matter where the magnet was relative to the sensor. so i bought a new sensor, plugged it in and reads 0% even when i bring the magnet (new one) close to the sensor no change still reads 0%, and i did try both sides of the magnet. Since this one had been through a crash i tried the one in my 90 (everything is new in my 90) same thing GV-1 (completely brand new) reads 97% on the display crank the motor by hand no change still says 97% tried new sensor. It reads 0% moved magnet closer no change just like the one in my 50.
can someone shed some light on this for me.
hope someone can help, I have two heli's raptor 50 and 90SE both with GV-1. The 50 has been rebuilt after a crash new servos and reciever, and the 90 is new never flown both have been sitting for over a year.
now the problem i'm having
i started with the 50 the GV-1 sensor is reading 97% no matter where the magnet was relative to the sensor. so i bought a new sensor, plugged it in and reads 0% even when i bring the magnet (new one) close to the sensor no change still reads 0%, and i did try both sides of the magnet. Since this one had been through a crash i tried the one in my 90 (everything is new in my 90) same thing GV-1 (completely brand new) reads 97% on the display crank the motor by hand no change still says 97% tried new sensor. It reads 0% moved magnet closer no change just like the one in my 50.
can someone shed some light on this for me.