XCELL 60 Starter cone

[cmjetta]

I've been out of the heli scene for about 15 yrs or so. I used to own and fly a Concept 30 & Xcell 60 custom. I received an xcell 60 in trade and I am in need of some answers. I need to purchase a few items first, one being the starter, I remember a starter extension on my starter, to match up to the cone on the heli. But all I find online is a shaft extension hex rod or nothing that looks familiar to me. Is there a new cone or mod that I need or a better online store?

[DavidH]

MA does not supply starter cones on their helis now. They recommend the one way bearing start shaft that goes right on the start shaft.
http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA4684

David

[Peter]

Or you can fit a Raptor50 hex adaptor ( PV0361 ) to the start shaft , and use a starter with a one way bearing in it ...

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=ACEPV0361


Looks like the MA adaptor, David's link above, is the cheapest option atm though .....

[cmjetta]

Thanks for the great replies that helps a great deal. Put my order in already.

[always_rc]

So, does the raptor hex adapotr have a 6mm input hole? I know that the adaptor off my evo 50 is to small.

[DavidH]

There is two hex adapters from TT. One has a 5 mm shaft hole, the other one has a 6mm hole. Have to make sure it is 6 mm. The 5mm one was used on the early 30 size models.

David