LOGO10 10s A123 / lipo 6s - setup z-power 800 / 1100 ?

[hannson]

anyone using Zpower 1100 with 10S A123?
i want to use my other lipo packs 5s and 6s interchangable with 10s A123
is it possible to use with f.eg 13t pinion? and what is max rpm of this motor?
maybe z-power 800 or other motot will be better option?

[GGoodrum]

Actually, I think this might be okay. We've been running a Z50A-800 on 12s-3800s in a Raptor, and a Z30A-800 in my Logo 10 Carbon on 12s-2200. In both cases the motors are spinning well over 30,000 rpm and still not getting hot. With the a123s, you will want to go up a tooth, or two, in pinion size. I'd try a 14T, to start.

-- Gary

[BobbySmith]

Hanson we are using the Z30A-1100 on 6s 3700 FLIGHT POWER lipos running a mod 7 logo gear 138 tooth wiht a 14 tooth pinion in GOV mod on a CC45HV also spinning the head @ 2300 and power is ballistic for Hard 3D for 4 to 5 minutes
No heat issue @ all


Bobby

[GGoodrum]

For those that have been waiting, I finally got more Z50A-600s and Z50A-800s back in stock. Several have been running the -800 on 12s in Raptors and MA Razors, and I think it would also do quite well in a Logo 600 3D on 12s, when it fianlly comes out. A 15s a123 setup would work similarly.

-- Gary

[LITHIUMSTATIC]

I'm running a Z50A-800 on Flight Power 6s 5000mah in a E-620. I don't fly 3D.