SB16 o-ring size [Archive]

Greg McFadden

11-19-2004, 12:53 PM

anyone know the proper o-ring size for the hatori sb-16?

DavidH

11-19-2004, 02:15 PM

#211 Viton

#210 will work but it is a little tight and seems to burn out quickly due to being tight.

I use the #211 Viton 80/90 Durometer. They are reddish brown in color.

David

Greg McFadden

11-19-2004, 02:22 PM

where do you get those from? I was planning to get some high temp ones from smallparts or mcmaster

rcheliflyer

11-19-2004, 02:23 PM

I bought some 75D viton 211 orings from:

http://www.allorings.com/

pn V1000-211

bag of 25 deliverd was not too much $$ as I recall, a lot
less than the OE Hattori ones.

Greg McFadden

11-19-2004, 02:31 PM

coo. I just wish that shipping didn't double the cost :shock:

cdrking

11-19-2004, 11:39 PM

I just ordered some from this place. http://www.mcmaster.com

Good price too.

Jeff

DavidH

11-20-2004, 10:07 AM

Greg,
I bought my Orings at Motion Industries. They have facilities located all over the USA. I gave $18 for a bag of 50.
http://www.motionindustries.com/motion3/jsp/mi/motion.jsp

The link will get you to the website. You can look up your location.
Try this site and see if one of the locations is close to you. Call them and ask them about the orings.

#211 Viton Orings.

David

Lee Taylor

11-23-2004, 03:48 PM

Is this the same size as the SB-10 by chance??? If not, can anyone help me out with a size as well...THANKS!!