Swashplate 140

[ibrahim]

:D Regards friends, in this moment I am trying to place the Swashplate 140 of my e620 but the programming of my 9z is something complex, some of you can help me with this programming?

Thank you!! :oops:

[Ticidytoc]

If your 9Z does not have 140, you need to use a 120 program and a mix to make it work.

[capebob]

The 9Z can easily be programed for 140 swash buy using a P mix. This page is for the 9C but it works the same on the 9X.

http://www.futaba-rc.com/faq/faq-9c-q678.html

Bob

[stevehonn]

If your 9Z does not have 140, you need to use a 120 program and a mix to make it work.

Strange, I set up my DX7 for 140 and had to set it for 90 degree and add elevator to pitch mixing, its worked very well and the 140 swash is a great improvement.

[Rocket Man]

Stranger still - I used the regular 120 setup on my DX7 and just added some elevator to pitch mix. I also like the 140 swash very much.

Looks like there are a number of ways to solve this puzzle.

Ron

[Finless]

Yes the 9Z will do 140 with the Pmix BUT the latency is even worse than 120. I tried it on my Vibe 90 and I could feel the latency increase with the Pmix. I went back to 120 because of it.

Bob

[zeusss]

Hi all

Brand new to the forum (and rc heli's, come to think of it) and would appreciate your help.

I have just bought an E-550, the problem is, I have a futaba 6exh radio, what settings do I use on the e550 swashplate and also on the radio?

Len