View Full Version : Logo 14 on Neu Motor 1912/1.5Y Fan
wcc963
04-18-2007, 04:56 PM
what would be a good ESC for this motor, running TP 10S
Try a cc85hv or a kontronic 55-10-32.
Personally the castle esc's have given me nothing but trouble.
You might be dissappointed with the 1912-1.5y's power on ten cells, it really likes 12 cells to get it's rpm up.
wcc963
04-18-2007, 09:11 PM
how about in a logo 103D on 6S?
Do you mean which esc or how would the 1912-1.5y run on 6s in a logo 10-3d ?
If you're referring to the motor, it certainly is far from ideal, you want to run the 19xx series motors around 26,000 to 29,000 rpm for best power and effeciency.
On 6s it will be turning just over 10,000 rpm, way too low.
It'll be okay for puttering around in the logo14 on 10s, it just won't knock your socks off like the 1912-1y or 1915-1y.
If you already have the motor, just run it, if it's the older tp prolite batteries it'll be easier on them than some of the newer, more amp hungry motors.
wcc963
04-19-2007, 10:32 PM
well actually im considering getting a logo 103D now, and was wondering what a good motor ESC combo was. i was considering the NEU 1907/1.5Y with fan, and a CC45HV
OICU812
04-20-2007, 01:19 AM
The NEU 1910-1Y would be a far better motor. NEU is re designing these as well with new casings etc and are supposed to be good up to 10S now. :WOW
wcc963
04-22-2007, 08:37 AM
The NEU 1910-1Y would be a far better motor. NEU is re designing these as well with new casings etc and are supposed to be good up to 10S now
for the logo 103D or the 14?
The NEU 1910-1Y would be a far better motor. NEU is re designing these as well with new casings etc and are supposed to be good up to 10S now
for the logo 103D or the 14?
For the logo 10-3d, I'm pretty sure.
Kv is too high for the logo 14 on 10s I think.
OICU812
04-22-2007, 03:20 PM
KV is far too high for a Logo 14 yes.