T-Rex Swashplate Bearing Needs a Fix!

[Laddy]

Be sure and add 2 little screw to the lower part of the swashplate (like the shogun mod.) to capture the bearing. I pushed on mine to make sure it was tight and it pushed out. It looks to have had loctite on it but did not take. I think the put them together with out cleaning the oil off the OD of the brg. Also i took the little ball retainer off and put 4 dabs of CA on it to make sure it does not come off.
Someone has already posted about it.
Just a sugestion.

[rob_jones]

Good call! I need to check mine while it's still taken apart. :mrgreen:

[Hotshot Charlie]

Photos of this??? please????

[NolanManley]

I knew there was someting I forgot to do on the build. :DOH
I'll have to watch it close.

[Laddy]

Here are some pics so you can see what i am talking about.
http://www.helifreak.com/album_mod/upload/8af177f1e0bd6cb02f6fe112000552d5.jpg
http://www.helifreak.com/album_mod/upload/b63a1c981befaca3dc4d28169c70bcf7.jpg

[WillJames]

Sweet Mod Laddy.

What I did was highlight one of your links, then click the IMG button above the box where you type the post. Then do that a second time for the second pic and they show inline. Click edit on your post and you can see what the IMG button adds to them.


Thanks for sharing your mod!! Safe flying RULES!! :)

[Hotshot Charlie]

Cool, Thanks Laddy !!!