Hover pitch with 9C

[Bastian1337]

Hi Freaks!

How do you adjust the hover pitch with a 9C?
My pitch curve is 30-40-50-75-100. The Hover-Pitch menu won't help much since it affects the pitch at center stick but I am hovering at about 3/4 stick.
I can't find a position where the heli hovers, it either gains or loses altitude.
The trim for the pitch stick unfortunately effects only the throttle channel.
I also thought i could set up a slider to trim the pitch but it didn't work out well.
Is there an easy way to trim the hover pitch at 3/4 stick?


Bastian

[Bastian1337]

Is there maybe a way to assign the throttle trim to pitch? That would be the most convenient way.

[MarkD]

Disable the pitch and throttle trim dials and use the curves

[Bastian1337]

I don't think the pitch curve would be sensitive enough to set the hover pitch properly. Also i use different batteries that weigh differently. So i would like to adjust the hover pitch during flight without going into the curve menu all the time.

[BarracudaHockey]

Pitch trim as you saw only effects point 3 AND only then in normal mode.

[Bastian1337]

Yeah that is what I tried to say. Because of that reason iI am looking to trim at 3/4 stick. Do you have a idea?

[kraaijer]

You do have the hi/low pitch settings that you can use in normal and Idle 1. They default to the sliders on the back.

These settings will change the lo and hi points of your curve. Try to play around with that...

Ron