Trex 450 Pro main shaft spacers (2)

[xStatiCa]

Does anyone have some spare 450 pro main shaft spacers (for shimming the main shaft)? I need 2 of them which someone has already tested and will fit perfectly where I need them for a new tail that I bought for my 700e heli. It appears the only way to get the spacers is to buy main shafts. Certainly there has to be a few people that have crashed their trex 450 pro and has a few spare :).

[heliddd]

Here it is

http://www.amainhobbies.com/product_info.php/cPath/1_25_1458_698/products_id/31280/n/HPI-5x7x02mm-Washer-10

[xStatiCa]

Actually it looks like they are a different size.

450 pro manual shows the shims as: 5x 9x0.1
The shims you linked to are: 5x 9x0.2

Still looking for the 450 pro shims I guess.

[heliddd]

You need 2 of them? -> .1mm x 2 = .2mm?

[xStatiCa]

I need the spacers that are in the below package:

http://www.amainhobbies.com/product_info.php/cPath/2_375_1498_1341/products_id/154110/n/Align-Main-Shaft?utm_source=Google-Base&utm_medium=cpc&utm_campaign=Product-Feeds&source=google_ext

[heliddd]

Either one will work for you.

http://www.amainhobbies.com/product_info.php/cPath/2_378_468/products_id/143040/n/Compass-Model-51x10x01mm-Washer-10

http://www.amainhobbies.com/product_info.php/cPath/1_25_1463_1153/products_id/36775/n/Shepherd-5x7x01mm-Adjusting-Shim-10

[xStatiCa]

http://www.amainhobbies.com/product_info.php/cPath/1_25_1463_1153/products_id/36775/n/Shepherd-5x7x01mm-Adjusting-Shim-10

that will work according to someone else too. Thanks!

These should work too and much cheaper.
http://www.amainhobbies.com/product_info.php/cPath/1576_699/products_id/188793/n/ProTek-R-C-5x7x01mm-Clutch-Bell-Shim-10

[Kinetic One]

PM me your address and I'll mail you a couple.

[xStatiCa]

Sweet. Thanks Kinetic One!