PDA

View Full Version : Battery type selection


MarkWebber
04-21-2007, 12:41 PM
I've got some woes on my flybarless Raptor. Currently it's flying with a 2700mah nimh on the rx. Problem is available current. By the middle of the 2nd flight, I'm down to 3.3v and getting lockout. Afterwhich, I'll only have to add 550-650ma back into the pack. The only way to duplicate this is a 2 amp load on the ground. Should I just switch to lipo for the higher C rating?

Wyn
04-22-2007, 12:49 AM
Lots of possible combinations that work well, four cell or regulated. There is some info at VoltMagic FAQ (http://www.voltmagic.com/faqs.htm) and Hangtimes FAQ (http://www.hangtimes.com/rcbattery_faq.html) pages.

On the VoltMagic FAQ page There is actually a comparison graph of a battery that might be similar to yours, along one that's much better. Quite a difference, the 1950 FAUP is a hard battery to beat.

Wyn
VoltMagic

MarkWebber
04-22-2007, 06:52 AM
Thanks for the links, Wyn