8103 delta wing programing question

[terb0]

I'm sorry to do this here but everybody should have a smac to fly when the evening comes . I have a friend that has an 8103 and i am having trouble getting the radio adjusted correctly. for those that dont know a smac is like a small zagi ( delta wing w/elevon's) . I have the delta wing selected , the servos are plugged into the correct positions as per the manual. my problem is my elevator control is correct but my ailerons are reversed. if i reverse the ail and elev channels the ailerons are correct but the elevator is reversed. I'm missing something here.Is there another screen that i missed that has some adjustments on it. I'm sure I'm just overlooking the obvious but any help would be greatly appreciated Tom:?

[big-al]

try plugging them into the opposite channels. ie- reverse the plug positions.

[terb0]

been there done that. either way i go one control or the other needs to be reversed. tom

[Paul Hinz]

Are both servos installed with there outputs facing opposite directions (both toward the wingtips or wing root). I am flying a Trick Razor which is a short wingspan zagi with a 8103. My Elevator and Aileron are both set to reverse in the servo reversing screen.

Paul

[terb0]

Yes both are facing outward and are on the bottom of the wing. and the end closest to the output shaft are towards the rear of the wing. the plane that you are descibing is almost identical to what i am flying. a smac is a 24" mini zagi i may have to flip one of the servos over end ways to fix the problem . thanks for the reply :D tom