Gy401 and HiTec servos

[donskills]

Is/ has anyone any experience with the GY401 and Hitec Hi-Speed digital servos? :?

[flyinfool]

I am using the 401 with the HiTec HS6965 servo and can not tell the difference in the air from the Futaba 9254.
It can only get better when I convert to 6V soon. The Hitec will handle 6v with no problem.
I set mine up to leave the 401 with the servo travel at 100% and used a longer arm to get the speed and than used a Hitec servo programmer to set the end points of servo travel to eliminate binding at each end.
This setup works great and the servo does not leak oil with my boom mount.

[donskills]

:lol: Thanx Jeff!! Do you have the 401 set to DS or not?

[flyinfool]

Yes I use DS.

[donskills]

Thanx Jeff and may you have the best weather!!