Total cost to electrify .30 Rappy

[iflynething]

I have the nickel, chrome or whatever plating coming off my OS .32's sleeve. Instead of spending $50 or so on a new piston and sleeve I want to just go ahead and convert it to electric.

In the process I might just bump up to have the same power as I would if it were .50 powered.

What am I going to need and how much?

Batteries (what size though. I have seen usuals of 6s or so)
Motor
ESC
.50 Conversion (if that's what I choose to do)

Thanks for the help

~Michael~

[DebianDog]

I do not think there is a kit for a 30 sized you would have to fab up the pieces yourself.

[iflynething]

HHmmmm. What do you mean a kit. As far as something like a combo that would have the batteries, ESC and motor?

I didn't think there would be. I'm just talking about if I bought everything separate, like you're talking about? I THINK that's what you're talking about.

Pardon my ignorance :)

~Micahel~

[LITHIUMSTATIC]

HHmmmm. What do you mean a kit. As far as something like a combo that would have the batteries, ESC and motor?

I didn't think there would be. I'm just talking about if I bought everything separate, like you're talking about? I THINK that's what you're talking about.

Pardon my ignorance :)

~Micahel~

Upper Frames
Lower Frames
Titan Belt
Titan Boom
111 tooth main gear
8s 3300mah or 10s 3700mah Lipo..... I will be using a 10s 5000mah in mine because I like duration more than performance. Stay away from 6s packs on this heli as your flight times will suck and you won't have good power.
Z-Power Z-50A-800 from Tppacks.com
Kool Flight UBEC
Castle Creations Phoenix 85HV
Deans or EC3 conectors (I prefer the EC3 myself)
Shrink Wrap
9 Tooth Pinion Gear
620 blades

That setup right there will make you have to clean out your panties after you see rip through the air with way more power than a .50

That's enough to get you started. I'm sure there are some other smaller pieces I'm forgetting about. Let me know if you have anymore questions.

Jeremy

[cgbole]

pm sent
chuck