View Full Version : futaba 9chp with G3.5 setup
wesley_yap2002
04-23-2007, 10:37 PM
Hi guys..
need help with setting up those switches on G3.5
what is smoke? knob? and 3 pos switch??
how can i set thr-hold? thr-cut?
i can fly with my 9c hooked up with g3.5.. but those switches i can't quite figure out :dontknow
can someone help me with it?
thanks..
chopperben1
10-14-2007, 10:23 PM
Did you ever figure this out, I am trying to set mine up and I am having the same issues (with the same transmitter)?
OHIOBOWHUNTER
10-15-2007, 08:58 AM
Did you ever figure this out, I am trying to set mine up and I am having the same issues (with the same transmitter)?
me too :(
mx400
10-27-2007, 08:19 PM
I'm working on my 7c now I will let you guys know. I got it working perfect for planes...
johndoe25
10-31-2007, 01:06 PM
You will not get all of the switches to work with the 9C. You can go into the radio menu to change the switches to coinside with the switches in RealFlight. That way you can have smoke, retracts, idle up, throtle hold, ect.... on the switch(es) that you want.
mx400
10-31-2007, 02:14 PM
I got my 7c working. I had to use the channel reconfigure function in g3.5 to figure out what was working what.
johndoe25
10-31-2007, 04:29 PM
Mx400, the channel map & the radio menu goes hand in hand with each other.
mx400
10-31-2007, 06:01 PM
I did not have to do anything to my radio except choose the correct model programming. Then change some settings in the channel mapping menue.
ghtracey
10-31-2007, 06:08 PM
On the Interlink, those are actual "channels". On your radio the 3-pos is a Flight condition switch. To properly use your TX with an aircraft in G3.5, save a custom version, go to the aircraft section in the editor and change the radio type to "pass-through" and then program your radio exactly as you would for the real thing. I did this with many models in an Eclipse 7, including heli's with throttle hold, idle ups, governors, clyclic->throttle mixing, and adjustable gyro gain. Shoot me a PM if you have any specific questions, I'll try to help as much as I can. My Raptor program for G3.5 can almost be switched with the program for my actual raptor. :P
chopperben1
11-02-2007, 08:55 PM
Sounds like you guys have figured it out. I am going to try again based on these threads, and I may need some more advice, so I'll pm you next week if I do. I gave up last week. Thanks!