10G false low battery reading

[fvdriver]

Sunday when I turned on my 10G with the display button I got a low battery signal even though I had just finished charging it. If I turn it on with the power switch and it is transmitting the voltage reads correctly and matches the blancer on my charger. What is going on???

[TMoore]

What battery do you have in it?

TM

[fvdriver]

I am using a 2s TP lipo.

[TMoore]

Verify that the pack connector is securely plugged in. Could be a faulty connection.

TM

[fvdriver]

Thanks I will double check that. Could that result in a correct voltage reading in the transmitt mode? I would think that it would read incorrectly in both modes. But if I knew for sure I wouldn't be asking would I.:)

[TMoore]

If it doesn't work right, we can get it fixed for you, quickly.

TM

[fvdriver]

I have been busy but I checked the connection in the radio and it seems ok. The voltage in the display mode starts out about 7.2 volts then slowy drops until the alarm goes off. I am going out of town for a few days, but I will check it with the stock battery when I get back. The voltage in the normal, transmitt mode still seems to be reading and operating correctly. If the stock battery shows the same symptoms I will send it in for a checkup.

[jstnt]

Same problem here but I'm to far away (in Asia) could anybody show how to fix it? Can it be fix by instaling firmware again using USB cable? Please help