Which power connector do you like/use?

[jrohland]

I am only interested in connectors for your flight batteries.

I suspect most people use the bullet connectors they got with their ESC or motor for the phase (brushless motor) connections.

I don't really care about the connector on your receiver battery.

I want to know if Deans are anywhere near being knocked off the top.

jrohland

[MarkD]

4mm bullets

[WayneBrown]

I'm considering going back to powerpoles, so I won't vote. I'll get some and see how they are now, but I used to use them in E-Boats with a lot of success.

[Bastian1337]

I use the green 6 pole Multiplex connectors. They are very good up to about 30 amps. Not very popular in the US but in Germany.

[PaulH]

I voted "Other". I like the connectors from Astro Flight:

2-pin: http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LX3604

3-pin: http://www2.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXHEB5

They'll take 50A continuous and 100A peak.

[EricW]

I use these.
4mm gold connectors, great connector and impossible to shortcut
Are distributed by graupner over here.

Eric

[RC for life]

I voted other to and also use the Astro flight zero loss connectors. I use them for my align 450 and 600. It is a great connector. :D

[Shuttle RG]

Another vote for 4mm bullets

[Sunkan]

I use MPX contacts, very common in Sweden it seems.

http://www.microflight.se/tillbehor/kablar/mpxtips.htm

[s9joe]

i use the 4mm gold connectors because i think the deans is a BI!CH to solder

[eheliflyer]

Neu 6mm Bullet Connectors :smokin:

[PaulH]

Alvin: Here's a cheap source for your 6 mm connectors:

https://www.all-battery.com/index.asp?PageAction=VIEWCATS&Category=350

:)

[eheliflyer]

Paul that is a killer price!! I just might have to stock up! :D