Blade CX Body Help

[mwarren]

I bought a canopy it came today and I dont understand something so I thought I would post and maybe some else has seen this and could help me.
Here is a link to the canopy I got http://www.helihobby.com/html/rc_heli_canopy.html
Its the 3rd one down the silver highway patrol, The directions state to bond together with ca glue, but from what I see if I do that how will I put it on the heli and take it off, it doesn't split like the original CX body.
What do you guys think?

[helimech66]

I had a uh-1huey body with the same set up.(see my gallery) You have to take the blades off to installed.If you need to make adjustments on the pots I used a sodering tip to make a hole for the screwdriver to fit in. be careful not to leave the tip in the body to long or the hole will be huge. :glasses2:

[Kindling Maker]

GREAT I just bought one of those things. Sounds like it is going to be a pain. I had a pain shop I can paint it in, and I did not know that you had to glue it together. I dont think that is said anything about that. I realy figured it went on like the CX body

[txflyer]

buy a body remer.. the is a nice set thats either 20 bucks or less then 20. its a body remer and lexan sisscors. made by dubro.. got it at my local hobby shop..becareful the remer is very sharp..

[Kindling Maker]

NO hobby shop on post and I think my wife would get real upset if I went into down town mosul to find Heli parts and such, building roads fine, hobby shop she would be mad.