Spektrum DX7 in a Blade CP?

[subieguy]

I am thinking of buying a Spek DX7. I currently have a Blade CP and will buying a T-Rex 600 by the end of summer, or maybe for Christmas ha ha!! So I figure the DX7 would be a good investment.

I have searched the forums and cant quite find the answers to my question, so advice, comments and links are welcome.

My questions are:

1. Will I need a different RX for each heli? (makes sence that I would)
2. How do I adapt the DX7 rx to the e-flight 4-1... or do I?
3. Can I use the servos that came with my BCP with the DX7 system?
4. Will the servos that come with the DX7 work with t-rex?

Thats probably it for now, as things get answered I'll probably have more questions ha ha!!!

Mike

[dutch_anykey]

Hi,

1. Yep..unless you want to move the rx everytime you want to fly anoter heli.
2. You can. I use a ar6100 rx on my cp2. You will have to open the 4in1 controller (well opening means seperate the two halves. one half is rx part and other half 3in1 controller) . In the 3 in one controller part you find two 3 pin connections one is rudder and the other one is throttle. So connect these two to the ar6100 rx together with the 3 servo's for ccpm servo's...program the radio..and you are ready to go :D
3. yes the servo's of your bcp will work with the dx7 system
4. The servo's from the dx7 system will work with a trex600...many posts are already covering that subject...in short..they dont have fast response..but for an average flyer it will do.

Hope you can do something with these answers :D

cheers,
Maurice

[subieguy]

:noteworthy

Thank you!!! If all goes well I'll have the DX7 in a week or two. I have been reading up on it alot and it sounds pretty sweet. As for the Trex... well we'll see... its a bit of money when you add up blades, batterys and chargers :dontknow But hey... all in due time.

Thanks so much for your reply Maurice!!