Flybar setup on an HB KING?

[DKellett]

I am setting up a HBK... a little bit at a time.
With the throttle gimbal at 0, and all trims centered, after gyro initialization should there be a pitch to the paddles? If so, what degrees?
Also, what should be the position of the paddle arms (part # 005 (pg 17 of the manual) in relation to the flybar? When looking at the flybar from the side (the flybar is parallel to the tail boom) should the two paddle arms be in line with the flybar...neither above nor below the flybar line from this viewpoint?

[PDK]

Hi,

Everything should be level at 0 degrees. Best thing to do is download the finless setup videos from this site (doesn't really matter which specific heli. it is all relevant). That was the only way I was able to get my Twister 3d setup and flying (same manufacturer and reasonably similar to the HB king). You really need to see how to do the setup. The videos are awesome.

Phil