Hov Thr/Pit and Offset

[simon109]

Hi,

On my 9C I use VR(A) and VR(B) to adjust my throttle and pitch curve around centre stick in Normal mode, how do I set my 14mz to do the same and use LD to do pitch and RD to do throttle ?

another thing I use on my 9C is the Offset fot different trims in different flight modes how do I set this up on my 14mz ?

Thanks

Simon.

[DavidH]

Simon,
I don't have a 14, I have a 12Z. But it should be the same.
As for the pitch and throttle curve at mid stick or hover.
Go to the throttle and pitch menu. There will be a screen behind these that you can access. This is where you activate the throttle hover and pitch hover and assign them to the controls you want.

As for the trims, just make the trims Single for each flight mode. Then the trims will be remembered in each flight condition. There is no trim offset like on the 9C.
In the trim menu you will see Group or Single. Flip thru each flight condition and make the trim Single. Then you can adjust the trims in each flight condition and the transmitter will store them.

David

[simon109]

Whers is the Trim menu :oops:

Simon.

[DavidH]

Go to the Function menu. It will look like this.

Function Control Trim

On the far right next to trim, you will see COMB. or SEPAR.

You need to have SEPAR next to the functions that you want the trim to be Separate in each flight condition.

Just select the trim you want to change. Then you can select SEPAR or COMB.

David

[simon109]

Cool sorted now thanks very much David :glasses2:

Starting to get the hang of this radio now. :smokin:

Simon.

[DavidH]

Like I said, I have a 12Z. But the basics between the 14MZ and the 12Z are the same. All the software in the 14 is even labeed 12Z LOL.
Just on the 14MZ your using a touch screen, on the 12Z we are scrolling thru the menus with a wheel and joystick. Just like you had to do with the 9C.

Glad your getting the hang of it. I have messed with a few 14's, but it basically same as the 12.

David