View Full Version : N9 e, any one think this is worht looking into?
Raven_darkcloud
05-02-2007, 06:22 PM
I was thinking of doing a 10s or 12s setup on an electric conversion for the n9. With the narrow frame of the n9 is this somthing that will fit?
Raven_darkcloud
05-08-2007, 02:08 AM
Well after looking at the n9 up close it will take a custom frame to convert to e and that may take away from the n9. So hmm got some more looking to do.
ChrisS
05-11-2007, 11:36 PM
Yeah I did...
Stretch the boom to use 800's+, use the metal blade grips, 12S minimum. Turn the head at 1500 to 1700...
Chris
Raven_darkcloud
05-12-2007, 01:34 AM
You did the conversion? If so picts please
rsalazar
05-12-2007, 03:50 PM
Do you have any photos?
cgbole
05-28-2007, 07:03 PM
i'm in the middle of one right now.
actro 32-3, powerjazz, 12s tp 5000's, 11.27:1 ratio.
chuck
i'm in the middle of one right now.
actro 32-3, powerjazz, 12s tp 5000's, 11.27:1 ratio.
chuck
Pics Chuck. :mrgreen:
epc2.
cgbole
05-29-2007, 01:14 PM
mabey tomorrow, got to get a mounting plate made up.
i can post some but it just looks like a synergy with out the engine ect...
chuck
cgbole
05-31-2007, 07:15 AM
here is what we got so far...
Chuck,
You can do something like this to avoid the coupler and mount the motor higher.
Raven_darkcloud
06-01-2007, 12:35 PM
Ooooooooooooooh. :smokin: looks good.
cgbole
06-01-2007, 01:14 PM
this is just to get it in the air.
but that's not a coupler it's a adaptor from 5mm to 6mm . all one piece,
slides over the output shaft and runs up through the pinion and through the start shaft bearing block.