View Full Version : 3GX/life/pushglo/pin flag

10-30-2011, 11:11 AM
Good day all
Asked the question before, but nobody could realy help me. On my 600LE fbl(3gx) I`m currently using the 2 in 1 with 3000mah lipo receiver pack and 2 dsmj sats only. Want to go as per title - How will I connect this?

10-30-2011, 11:55 AM
what are you using for a failsafe switch to support using the pin flag?

11-01-2011, 11:02 AM
This is the pin flag I was talking about: http://helidirect.com/gsb-1030p-gryphon-pin-flag-switch-flux-led-p-24769.hdx seems like pulling the switch will power on. What are a failsafe switch. Or maybe I must ask it this way? I want to use a pushglo for the glowplug and a 6.6v life battery to power everything (pushglo and electronics) and a switch to switch on and off (Dont want to plug in or pull out the life battery wire on the 3gx unit all the time) So what switch can I use and how will I connect everything to the 3gx?
My 600LE has the stock servo`s installed which will handle the 6.6v life unregulated.

11-04-2011, 01:44 PM