Any better pix or description of mounting collective servo. It looks kind of funky by the book..
capebob
12-12-2004, 08:57 AM
I've been trying to get a decent shot of my servo, but my digital just doesn't do good closeups. My servo is mounted in the stock position and the servo arm (HS-55) lines up with the pitch lever perfectly if the pitch lever is reversed. To reverse the pitch lever loosen the collar on the collective pitch rod and remove the two little screws that mount the lever. Turn the pitch lever over and reinstall. The servo does stick out the side of the heli but it's not a problem. If you use a HS-56 or other servo that has more distance from the mounting flange to the output arm you don't have to flip the pitch lever.
Bob