Need help with Hurricane radio setup!!!

[edpet23]

:badair: I recently bought the Gaui Hurricane 550 with a Futaba 6EX-H
Radio. My problem is that I have been away from rc for a few years and am not quite up to date on which servo does what. I have a 6 channel receiver and hooked up { heli is sideways with tail to left } the aileron on ch-1 as with Futaba radio manual instructions, elevator on ch.2- throttle on ch.-3 Gyro or rudder on ch. 4 Gyro sensitivity on ch. 5. Now here's the problem, I still have the BEC and one servo left to connect!! Now my question is can anyone give me some advice on what to do??I have a Walkera 60 heli which doesn't have a bec!! The Gaui Hurricane 550's manual is lacking on these details, so I would appreciate any help.

Thanks
edpet23 :twisted:

[Finless]

See my build video series here:
http://www.helifreak.com/viewtopic.php?t=33603

There is one on servo setup. not a lot of newbee info but should help get ya started.

Bottom line you need to set the radio up for 120 CCPM swash plate. I do not know what the setting is on the 6EX-H but the manual tells you. SH3 maybe?

Rear servo connect to elevator, one of the front servos connects to aileron and the other front servo connects to channel 6 (pitch).

Bob