View Full Version : No Ino-Lab HDG 261 mg to be found!
Flyguide7
11-10-2011, 05:57 AM
I bought a Funcopter three months ago and still cannot find Ino Labs tail servo. Can anyone recommend an alternative? Thanks in advance.
AtTheCross
11-11-2011, 01:11 AM
i use HS81mg all the way around with my funcopters
krobinson103
11-11-2011, 01:20 AM
Try Nexus servos. Inolab and Nexus are the same manufacturer just with a different name. The specs on the similar model servos are almost identical. :lol:
i use HS81mg all the way around with my funcopters
Don't you mean Hitec HS82mg's? These are great servos imho.
Cheers,
TomC
AtTheCross
11-17-2011, 07:12 AM
Opps :o yep meant hs82mg :D
prophead
11-18-2011, 05:14 PM
i have 5084mg on me FC.
Q: has anybody squeezd in an FC into a 450 fuse?
ATC, where can i find the gear for the mainshaft for belt conversion? well, other than your product. my FC is itchin to come out from its box again. did flew her about 5 packs.
now im planning to dress her up with an md500.
thanks.
prophead
11-18-2011, 05:16 PM
oh, i bought her new jewelry, a 90amp gold scorpion. :lol:
gale155
12-31-2011, 08:14 AM
i have 5084mg on me FC.
Q: has anybody squeezd in an FC into a 450 fuse?
ATC, where can i find the gear for the mainshaft for belt conversion? well, other than your product. my FC is itchin to come out from its box again. did flew her about 5 packs.
now im planning to dress her up with an md500.
thanks.
I've got a 500 fuse (A-109) sitting next to my FC, and it's not that much larger. I've not measured anything, but with a few mods I'll bet it could be done. Whether or not the FC could handle the weight is another question, but I'm guessing it could on 4s.
AtTheCross
12-31-2011, 09:53 AM
funny, i have a 500 class md500 that i just started working on for my FC, i'm thinking that on the new v2 motor it will 'work' but agree would be better on 4s.
be sure to post your finished heli and i'll do the same
gale155
01-02-2012, 01:47 AM
funny, i have a 500 class md500 that i just started working on for my FC, i'm thinking that on the new v2 motor it will 'work' but agree would be better on 4s.
be sure to post your finished heli and i'll do the same
I'm not even thinking of trying to fit the FC in the Align A-109 fuse...I've got an EXI 500 with a Copter-X flapping 4-blade for that. I've got to work on my basic piloting skills some more before I think about finishing that project. :thumbup: I have thought about a less-expensive 500-class fuse for the FC though, but I'm still in the "thinking" phase.
I seem to recall from one of your mega-threads at another site that you have to shorten a 500 boom slightly when doing your belt mod. Excuse the noob question, but why do you have to do that? Seems to me that if you left the boom as-is, it could be fitted into a 500 fuse with fewer modifications. I assume it must have something to do with available belt lengths? This is way out of my league at the moment, but I'm just curious. :lol: