qb7ops
05-10-2007, 09:28 AM
Hi all,
I am looking at purchasing some additional Lipos and thinking about a change. Currently I use an 8s 4000mAh config ( 2 x MaxAmps 4000HV 4S 14.8V Packs (http://www.maxamps.com/proddetail.php?prod=Lipo-4000-148-Pack/url) in series). Is there any battery configuration one would recommend I try different on my setup, given that I am strickly flying AP?
I am limited in the L10 battery compartment (width & height) and really do not want to "double stack" batteries at the front. MaxAmps in 14.8V above 4000mAh I do not think will fit width wise in the battery compartment. I am on R&R right now so cannot measure the L10 Carbon.
I am fairly happy with the 8s but just figured there might be something a little better out there. Any suggestions would be greatly appreciated.
Thx - Lachlan
I am looking at purchasing some additional Lipos and thinking about a change. Currently I use an 8s 4000mAh config ( 2 x MaxAmps 4000HV 4S 14.8V Packs (http://www.maxamps.com/proddetail.php?prod=Lipo-4000-148-Pack/url) in series). Is there any battery configuration one would recommend I try different on my setup, given that I am strickly flying AP?
I am limited in the L10 battery compartment (width & height) and really do not want to "double stack" batteries at the front. MaxAmps in 14.8V above 4000mAh I do not think will fit width wise in the battery compartment. I am on R&R right now so cannot measure the L10 Carbon.
I am fairly happy with the 8s but just figured there might be something a little better out there. Any suggestions would be greatly appreciated.
Thx - Lachlan