14mz modul change solved.THANK YOU MEO UDON!

[DellGattoGrande]

Hello everybody from greece

first sorry for my bad english...

i own a 14mz...and i must change my module to another band...


anyway i fount out trying that the text file trick of the 12 doesnt work for the 14mz

...pleaseanyone can help me out

cose iam realy alone out here and i have no help....

last time i flew my jet....a car in the next feald was on the same band like me:(

i must access the set up menu to change the module i guess anyone know how?

anyway thak you for your time and again sorry for my bad engl;ish


best regards
George p.

GREECE

[DellGattoGrande]

no one?? :oops:

[Hirobofly]

Hi there.
What band is your radio on at the moment then? If it is "Europe", you can just purchase another module that has 35Mhz if that is available to use in your country. (or 36/40Mhz if that is legal where you are) What frequency are you on now that causes you problems?

If you have a radio purchased in either USA or Asia, you will have to re-program the 14MZ.
I think you will have to ask your local importer or Robbe if they have the knowledge/utility to change the frequency band. The original 14MZ Calibration Utility did not have the function when that software was available on different forums last year.

I think the Calibration-Utility for the Futaba FX-40 has that function to change the band, but I do not know if it works on the 14MZ and I think you can really mess up your radio if it does not work.

:)RJ

[DellGattoGrande]

hey rj thank you for your reply!!

mine now is on 40 and i need to change to 36
i have already the modul on the 36
now is usless cose many cars play on 40

my dealer sed we must sent it to futaba " dont know where"

i dont want to pay alot of shiping to sent it
secont i dont want my radio to travel and trow in cargos..

and lust i dont know how they will treat my radio there.. may be drop it and after wars blame me.

since i got it new in my hands it will never leave..cose it has no problem for what i hear for other radios in internet and i dont want to end up with problems..

i take the risck to do it on my own..

please i know there is a way and have been delete from here cose futaba could find out who was involve for this leak..

please i dont care for any waranty my radio is perfect so i need your help cose i cant use it for flying...

if somone has still this program or whatever it is.... please help me
:oops: :oops:

Best regards
George Papagiannis

[Hirobofly]

Hi George.
Ok, so you need to change the frequency-band from 40Mhz to 36Mhz.
You say you already have the new Module for 36Mhz, so what happens when you put it in and start the 14MZ? Does it not work? Do you get an error-message?

Here in Norway both 35Mhz and 40Mhz are legal bands to use for RC-airplanes/heli, and I can use a module for each band in my 14MZ that is branded for Europe.
If you radio is branded for Europe, it should really not be any problems.

Robbe in Austria (www.robbe.com) will probably be a good point to start if you need to have the radio serviced.

:)RJ

[DellGattoGrande]

hey rj...

my modul of 40 gives aeria "china" on screen

the 36 modul writes on australia sticer back..

screen say: mismatched frequency band...


i know robbe but im not wealing to sent them my radio.... first is becose they know nothing about servis this radio or any other.,...they dont manufactor futaba or have expert electronick department...

secont i wont like to ship nowhere my radio... :oops:





help :oops: ....i cant fly :oops:

this only can be done from the set up menu...but how i access it...


thanx in advance for any rep[lyes friends

[meo_udon]

I can help you by pm. Under 30 minutes you can fly with australia module.

[DellGattoGrande]

Mr.Meo Udon

this is the one great gentleman who helped me solve my problem with my 14mz...

thanx to him and his pation with me step by step online

i can again use my 14mz!

at the end he apologises for leaving becose time was over midnight to him!

he waited 1 hour to full charge my battery for the radio and then to show me the way step by step...

i wish one day this good will be return back to you sir

...not the module help ...but the good will of helping somone with out targeting in profit just becose ...modelers are above all people of the same kind all over the world


thank you again Meo Udon. i will stand up for you anytime .

best regards
your new friend from Greece
George Papagiannis
rc jet pilot

DelGatoGrande.rcuniverse.com

p.s. after this guy i start like helis :mrgreen:

[dopn]

hi
can you help me how to solve this problem
because I have the same problem with my 14mz(japan version) from 72 to 36mhz
tks

[benben]

you need to hack into the module and change the code