TRM/Zenoah break-in/operation procedures

[bigrcr]

Here's a link to the TRM forum.

http://www.helifreak.com/viewtopic.php?t=4301

[skiboy]

Hey John,,
I dont know if you remember me but I call you on Christmas Eve and you were so kindly to help me , I had trouble starting my spectra and you got me going over the phone and it was the grounded sheild..
Well I now have gone through about 5 tanks of fuel and the engine or muffler sounds link some tin cans banging together, is this normal? and remember when the engine finnally started christmas eve and I told you that the engine reved up and we had to hold the rotor head well I just knoiced today that the clutch liner is coming down and rubbing on the carbon frames and leaving dust, is this normal or should I be alarmed and start looking to replace the liner... Because it sounds like I have to really get the engine rpms up more than normal to get the blades to start spinning...

Steve..

[skiboy]

John also I was wondering on my 611 gyro it will not hold the tail , it wants to keep swinging to the right(the tail)is this because it is still in the break in stage????

[CitationX]

John,

The link to your TRM break-in procedure is not working:

http://www.helifreak.com/viewtopic.php?t=4301

I am about a week or 2 from getting my Spectra going and would like to see what your recommendations are.

Thanks

[Peter]

try this , if it's too hard to scroll down the main list ......


http://www.helifreak.com/forumdisplay.php?f=48