ar6000 pins

[txflyer]

im alittle confused, today i bought a ar6000 rx for my pro. right now im plugging everything in, i am stuck with the pitch servo. the ar6k doesnt label anything pitch, and i cannot find the info in the book. im aussuming that the pitch servo plugs into the gear channel. also does the dx6 do gyro sensing ? or do i need to adjust the pot on the gyro

[aristo]

on the dx7 pitch goes in aux1 gear is for your gyro's gain wire im assuming the same for dx6,but some dx6 owners can chime in for any corrections.

[txflyer]

ya ive got itall figured out now. i had some things reversed and dint know it. but my heli guy said i was pretty damn close to a good setup. 2 servos had to reversed, and my pitch curves where cracked out. i had 10% more pitch then normal. and only like 5% total negative pitch

[carlo_the_wonder_frog]

The pitch servo connects to the "AUX" channel ( 6) on the AR6000 RX. The "Gear" channel is for setting the gyro gain remotely.

[txflyer]

yes yes i hate setting the gyro gain on the gyro.. thanks guys. i still have yet to make my first flight with the dx6 but im getting there. my pitch curves where set to where normal had was like idle up. i couldnt drop the stick cuz itwould go full - pitch. but i got that changed now imgoing to learn how to use the remote gain