View Full Version : ICE 50 Lite and Align 450MX 3400 15T Pinion

01-11-2012, 02:30 PM
Can anyone please post your setting for the CC 50 Lite Set RPM. I just picked up one. Motor timing and so on. Thanks in advance.

01-11-2012, 02:43 PM
I've got the same setup.

I run SetRPM at 2650, 2950 and 3200
PWM at 12kHz
Timing default at 5
Current limiting at insensitive (80A)
Gov gain 27
Initial spoolup 5
Headspeed changerate 12

01-15-2012, 10:43 AM
Governor mode
set RPM
auto-rotation enabled
governor gain 25
initial spool up 7
head speed change 5
brake (ALWAYS OFF on heli's)
current limiting 70a
cutoff type SOFT

start power 59
timing 5
direction forward
pwm rate 8 (2221-8 motor)
start with 8 on pwm fly it hard just bump it up just 1 notch fly it hard again and compare heat at the end of the flight

04-29-2013, 09:37 PM
The governor gains are supposed to be that high? What happens if its too low?